Čeština (Česká republika)
There are no translations available.

BORÁK, L.; FLORIAN, Z.; ROZKYDAL, Z.

Článek se zabývá analýzou deformačně napěťových stavů acetabulární komponenty totální endoprotézy kyčelního kloubu. Práce je zaměřena na necementovanou CLS press-fit jamku a její interakci v soustavě pánevní kost/jamka/hlavice endoprotézy. Řešeny byly dvě varianty: První variantou byla analýza jamky aplikované v acetabulu se zdravou kostní tkání, druhá varianta zkoumala vliv defektu uvnitř acetabula.

 
There are no translations available.

BORÁK, L.; MARCIÁN, P.; MRÁZEK, M.

Článek se zabývá zjišťováním deformačně napěťových stavů zdravé kostní tkáně v okolí zubů, zatěžovaných běžnými okluzními silami. Spojení zubů s dolní čelistí je realizováno prostřednictvím tenké vrstvy periodontia, které bylo modelováno lineárním isotropním modelem materiálu. Součástí řešení je též výpočet koronoapikálních a bukolinguálních posuvů zubů při různých způsobech zatěžování. Znalost mechanické odezvy kostní tkáně ve fyziologickém stavu je důležitá pro následnou srovnávací analýzu fyziologického stavu dolní čelisti s čelistí s dentálním implantátem.

 
There are no translations available.

BORÁK, L.; FLORIAN, Z.; BARTÁKOVÁ, S.

Práce se zabývá modelováním materiálových vlastností periodontia. Článek se zaměřuje na bilineární model materiálu, jehož charakteristiky byly určeny s použitím experimentálních výsledků měření pohyblivosti zubu ve dvou vzájemně kolmých směrech, získaných z literatury.

 

This article deals with possibilities of a CT image processing. The CT images are nowadays usually used for creation of geometry models of bones but besides, it is also possible to get from these images information of an apparent density of the cancellous bone. Moreover, based on the known correlation equations mechanical properties of the bone can be obtained. The density can be expressed in Hounsfield units and this quantity play very important role in a preoperative diagnostics. For instance, bone quality is the relevant factor in case of dental implant application. New software called ROI Analysis which can easily perform CT image processing has been developed. By using this software it is possible to analyze the quality of bones and results can be used in computational modeling as well. Finite element models for a specific person can be built. Possibilities of new created software are presented in three examples.

 

The presented work is focused on the biomechanical study of the dental disk implant. The first part of the study deals with the strain analysis of the affected bone tissue and the dental implant loaded in the coronoapical direction by force 190N. The study includes three types of implant anchorage, four degrees (stages) of osseointegration and nine degrees describing the quality of the cancellous bone. Two types of the disk implant were solved: single disk and double disk implant. Biomechanical study of the implant was focused on a stress strain analysis of the affected bone tissue. The biggest influence on the stresses in the bone tissue has primarily an implant anchorage. By the application of correlation relationships between Young modulusand the apparent density of the bone tissue (which is measurable in patients) we can the results presented in this study express depending on this variable.

 
More Articles...