Čeština (Česká republika)

People

Ing. Zdeněk Florian, CSc.

Position: Senior Lecturer
Department: Brno University of Technology / Faculty of Mechanical Engineering
Institute of Solid Mechanics, Mechatronics and Biomechanics
Education and academic qualification: 1976, Eng., Brno University of Technology, Faculty of Mechanical Engineering, Department of chemical and grocery machines
1981, Brno University of Technology, PGS Informatics, numerical method
1991, PhD. Brno University of Technology, Faculty of Mechanical Engineering, branch Machine construction of energy engineering and equiptments
Pedagogic activities: Strength of Materials I
Strength of Materials II
Biomechanics II
Statics
Deformation and Demage Processes
Limit Status and Reliability
Publications:

MARCIÁN, P.; FLORIAN, Z.; BORÁK, L.; KRPALEK, D.; VALÁŠEK, J.:
Biomechanical Study of Disk Implants, Part II

BORÁK, L.; MARCIÁN, P.; FLORIAN, Z.; BARTÁKOVÁ, S.:
Biomechanical Study of Disk Implants, Part I

VALÁŠEK, J.; MARCIÁN, P.; KRPALEK, D.; BORÁK, L.; FLORIAN, Z.; KONEČNÝ, O.:
Material Properties of Bone Tissue Obtained from CT for Biomechanics Purposes

MRÁZEK, M.; FLORIAN, Z.; VESELÝ, R.; BORÁK, L.; MARCIÁN, P.:
Strain-Stress Analysis of Lower Limb with Applied Fixator

MARCIÁN, P.; PETRLÍKOVÁ, H.; FLORIAN, Z.; BORÁK, L.; MRÁZEK, M.:
Stress strain analysis of dental implants

BORÁK, L.; FLORIAN, Z.:
Tvorba bilineárního modelu materiálu periodontia

BORÁK, L.; FLORIAN, Z.; ROZKYDAL, Z.:
Deformačně-napěťová analýza pánevní kosti s press-fit jamkou

další zde

Products:

STL Model Creator
CT Data Analysis
ROI Analysis

další zde

Phone: +420 541 14 2863
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Ing. Libor Borák, Ph.D.

Position: Research assistant
Specialization: FEM Engineer
Department: Brno University of Technology / Faculty of Mechanical Engineering
Institute of Solid Mechanics, Mechatronics and Biomechanics
Projects:

Studie mechanických vlastností a chování dolní čelisti po protetické sanaci

Education and academic qualification: 2006, Ing., Faculty of Mechanical Engineering in the field of Applied mechanics
Pedagogic activities:

Strength of Materials I

Publications:

MARCIÁN, P.; FLORIAN, Z.; BORÁK, L.; KRPALEK, D.; VALÁŠEK, J.:
Biomechanical Study of Disk Implants, Part II

BORÁK, L.; MARCIÁN, P.; FLORIAN, Z.; BARTÁKOVÁ, S.:
Biomechanical Study of Disk Implants, Part I

VALÁŠEK, J.; MARCIÁN, P.; KRPALEK, D.; BORÁK, L.; FLORIAN, Z.; KONEČNÝ, O.:
Material Properties of Bone Tissue Obtained from CT for Biomechanics Purposes

MRÁZEK, M.; ŽAMPACHOVÁ, E.; BORÁK, L.; MARCIÁN, P.:
Strain - Stress Analysis of Tibia

MRÁZEK, M.; FLORIAN, Z.; VESELÝ, R.; BORÁK, L.; MARCIÁN, P.:
Strain-Stress Analysis of Lower Limb with Applied Fixator

MARCIÁN, P.; PETRLÍKOVÁ, H.; FLORIAN, Z.; BORÁK, L.; MRÁZEK, M.:
Stress strain analysis of dental implants

BORÁK, L.; MARCIÁN, P.; MRÁZEK, M.:
Stress-Strain Analysis of Alveolar Bone

BORÁK, L.; FLORIAN, Z.:
Tvorba bilineárního modelu materiálu periodontia

BORÁK, L.; FLORIAN, Z.; ROZKYDAL, Z.:
Deformačně-napěťová analýza pánevní kosti s press-fit jamkou

Products:

Skeletal System
STL Model Creator
CT Data Analysis
ROI Analysis

Phone: +420 541 14 2871
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Ing. Petr Marcián

Position: PhD student
Specialization: FEM Engineer
Department: Brno University of Technology / Faculty of Mechanical Engineering
Institute of Solid Mechanics, Mechatronics and Biomechanics
Projects:

Biomechanická studie zubních implantátů pro sníženou densitu kostní tkáně

Education and academic qualification: 2008, Ing., Faculty of Mechanical Engineering in the field of Applied mechanics
Pedagogic activities:

Engineering Mechanics
Kinematics

Publications:

MARCIÁN, P.; FLORIAN, Z.; BORÁK, L.; KRPALEK, D.; VALÁŠEK, J.:
Biomechanical Study of Disk Implants, Part II

BORÁK, L.; MARCIÁN, P.; FLORIAN, Z.; BARTÁKOVÁ, S.:
Biomechanical Study of Disk Implants, Part I

VALÁŠEK, J.; MARCIÁN, P.; KRPALEK, D.; BORÁK, L.; FLORIAN, Z.; KONEČNÝ, O.:
Material Properties of Bone Tissue Obtained from CT for Biomechanics Purposes

MRÁZEK, M.; ŽAMPACHOVÁ, E.; BORÁK, L.; MARCIÁN, P.:
Strain - Stress Analysis of Tibia

MARCIÁN, P.; PETRLÍKOVÁ, H.; FLORIAN, Z.; BORÁK, L.; MRÁZEK, M.:
Stress strain analysis of dental implants

BORÁK, L.; MARCIÁN, P.; MRÁZEK, M.:
Stress-Strain Analysis of Alveolar Bone

Products:

Skeletal System
STL Model Creator
CT Data Analysis
ROI Analysis

Phone: +420 541 14 2871
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Ing. Michal Mrázek

Position: PhD student
Specialization: FEM Engineer
Department: Brno University of Technology / Faculty of Mechanical Engineering
Institute of Solid Mechanics, Mechatronics and Biomechanics
Projects: Biomechanická studie fixátorů dlouhých kostí
Education and academic qualification: 2008, Ing., Fakulta strojního inženýrství VUT v Brně, obor Aplikovaná mechanika, specializace Inženýrská mechanika
Pedagogic activities: Statics
Publications:

MRÁZEK, M.; ŽAMPACHOVÁ, E.; BORÁK, L.; MARCIÁN, P.:
Strain - Stress Analysis of Tibia

MRÁZEK, M.; FLORIAN, Z.; VESELÝ, R.; BORÁK, L.; MARCIÁN, P.:
Strain-Stress Analysis of Lower Limb with Applied Fixator

MARCIÁN, P.; PETRLÍKOVÁ, H.; FLORIAN, Z.; BORÁK, L.; MRÁZEK, M.:
Stress strain analysis of dental implants

BORÁK, L.; MARCIÁN, P.; MRÁZEK, M.:
Stress-Strain Analysis of Alveolar Bone

Phone: +420 541 14 2871
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Ing. David Krpalek

Position: PhD student
Specialization: FEM Engineer
Department: Brno University of Technology / Faculty of Mechanical Engineering
Institute of Solid Mechanics, Mechatronics and Biomechanics
Projects:

Biomechanical study of the wrist

Education and academic qualification: 2008, Ing., Faculty of Mechanical Engineering in the field of Applied mechanics
Pedagogic activities: Kinematics
Publications:

MARCIÁN, P.; FLORIAN, Z.; BORÁK, L.; KRPALEK, D.; VALÁŠEK, J.:
Biomechanical Study of Disk Implants, Part II

VALÁŠEK, J.; MARCIÁN, P.; KRPALEK, D.; BORÁK, L.; FLORIAN, Z.; KONEČNÝ, O.:
Material Properties of Bone Tissue Obtained from CT for Biomechanics Purposes

Products:

Skeletal System
STL Model Creator
CT Data Analysis
ROI Analysis

Phone: +420 541 14 2871
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Ing. Jiří Valášek

Position: PhD student
Specialization: FEM Engineer
Department: Brno University of Technology / Faculty of Mechanical Engineering
Institute of Solid Mechanics, Mechatronics and Biomechanics
Projects: Biomechanical studies of facial skeleton
Education and academic qualification: 2008, Ing., Faculty of Mechanical Engineering in the field of Applied mechanics
Pedagogic activities:

Kinematics

Publications:

MARCIÁN, P.; FLORIAN, Z.; BORÁK, L.; KRPALEK, D.; VALÁŠEK, J.:
Biomechanical Study of Disk Implants, Part II

VALÁŠEK, J.; MARCIÁN, P.; KRPALEK, D.; BORÁK, L.; FLORIAN, Z.; KONEČNÝ, O.:
Material Properties of Bone Tissue Obtained from CT for Biomechanics Purposes

Products:

Skeletal System
STL Model Creator
CT Data Analysis
ROI Analysis

Phone: +420 541 14 2871
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Ondřej Konečný

Position: Student
Specialization: Matlab Programmer
Department: Brno University of Technology / Faculty of Electrical Engineering and Communication
Department of Control and Instrumentation
Projects:  
Education and academic qualification:  
Pedagogic activities:  
Publications:

VALÁŠEK, J.; MARCIÁN, P.; KRPALEK, D.; BORÁK, L.; FLORIAN, Z.; KONEČNÝ, O.:
Material Properties of Bone Tissue Obtained from CT for Biomechanics Purposes

Products:

Skeletal System
STL Model Creator
CT Data Analysis
ROI Analysis

Phone:  
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Bindioa Gilbert Ouali

Position: PhD student
Specialization:

FEM Engineer
Matlab Programmer

Department: Brno University of Technology / Faculty of Mechanical Engineering
Institute of Solid Mechanics, Mechatronics and Biomechanics
Projects: FEM application at mechanics problem solving of the human ear focusing on ear surgery
Education and academic qualification:  
Pedagogic activities:  
Publications:  
Phone:  
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Ing. Michal Matug

Position: PhD student
Specialization:

FEM Engineer

Department: Brno University of Technology / Faculty of Mechanical Engineering
Institute of Solid Mechanics, Mechatronics and Biomechanics
Projects: Replacement cords for generating source voice
Education and academic qualification: 2008, Ing., Faculty of Mechanical Engineering in the field of Applied mechanics
Pedagogic activities:

Engineering Mechanics
Kinematics

Publications:  
Phone: +420 541 14 2871
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Ing. Martin Stodola

Position: PhD student
Specialization: FEM Engineer
Department: Brno University of Technology / Faculty of Mechanical Engineering
Institute of Solid Mechanics, Mechatronics and Biomechanics

Projects:

Analysis and computer modeling of the phenomenon of tinnitus
Education and academic qualification: 2008, Ing., Faculty of Mechanical Engineering in the field of Applied mechanics
Pedagogic activities: Kinematics
Publications:  
Phone: +420 541 14 2871
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it